products

VALVES - HOKE Ball Valves

Flomite 71 Series

Flomite 71 Series

2-way Integral Panel Mount Ball Valves. Used for quick on-off service with a visual indication of flow, HOKE’s 2-way ball valves offer orifice sizes up to 0.25” (6.4mm). Flomite valves feature a floating ball design, encapsulated replaceable seats and check seals to ensure leak-tight service and extended service life.

Typical Applications
  • Instrument panels
  • High pressure instrument lines
  • Gas sampling in pilot plants
  • Full flow and shutoff in chromatographs
  • Hydraulic test stands
  • Gas sampling cylinders
  • Handling corrosive and viscous fluids

Download PDF

Multimite 79 Series

Flomite 71 Series

4-way Trunnion Valves. Multimite 4-way, or dual switching valves allow two distinct flow paths to be used at the same time.

Typical Applications
  • Actuator cycling
  • Pressure selecting and venting
  • Alternate sampling and distribution

Download PDF

5-way Trunnion Valves. The 5-way, or diverter valves offer the same functionality as 3-way valves except with four alternate paths.

Typical Applications
  • Sampling systems
  • Distribution systems
  • Instrument range selection

Download PDF

Rotoball 72 Series

Flomite 71 Series

2–way Low Profile Ball Valves HOKE’s bar stock 2-way ball valves include a 0.375" (9.5 mm) orifice. Rotoball valves feature a floating ball design, encapsulated seats, and a trip-proof handle for safe, leak-tigh service and long service life.

Typical Applications
  • Hydraulic test stands
  • Handling slurries
  • Refinery pilot plants
  • Pneumatic systems
  • Corrosives handling

Download PDF

Selectomite 71 and 76 Series

Flomite 71 Series

Selectomite 3-way ball valves use 180° operation for diverting flow from one line to another. The handle points to the side port in use; when perpendicular to the side ports, it indicates the shutoff position.

Typical Applications
  • Instrument air lines
  • Sampling systems
  • 2-way gauge readout of line pressure
  • Manual cylinder actuation

Download PDF

Selectomite 76 Series

Flomite 71 Series

3-way Trunnion Valves. Developed for high pressure, side-loading applications, the 316 stainless steel trunnion is supported and held securely in position by two composite bearings. Encapsulated Nylatron seats provide a positive seal, resulting in leak-tight sealing between all ports to 6000 psig differential, reducing operating torque and increasing cycle life. The handle points to the side port in use; when perpendicular to the side ports, it indicates the shutoff position.

Typical Applications
  • Compressed natural gas dispensing
  • Instrument air lines
  • Sampling systems
  • 2-way gauge readout of line pressure
  • Down hole control systems on off shore drilling platforms

Download PDF

Ultramite 70 Series

Ultramite 70 Series

Ultramite 7015, 7022 Series
2-way valves

Typical Applications
  • High pressure test stands
  • Sampling lines
  • Instrument lines
  • Analyzer labs

Download PDF

Ultramite 7092, 7093 Series
2-way valves

Typical Applications
  • Slurry handling
  • Refinery pilot plants
  • Pneumatic systems
  • Corrosives handling

Download PDF

Ultramite 7065 Series
The Ultramite 7065 3-way ball valve uses 180° handle rotation for diverting flow from one line to another. The oval handle points to the port in use. When the handle is perpendicular to the valve body it is in the shutoff position.

Typical Applications
  • Analyzer labs
  • Sampling systems
  • Fluid diverting/switching

Download PDF